Grind # XA220/350-XA232/345-10+4
Hydraulic Roller Camshaft
Duration at .050": 220/232
110 Lobe Center Angle with a 106 Intake Centerline
Lift with 1.7 Rocker Arm Ratio: .595"/.586"
Recommended Displacement: 5.3-6.2 Liter Engines
Cylinder Heads: Cathedral Port or Rectangle Port
Recommended Compression Ratio: 9.4.0-11.5:1
Recommended Headers: 1 3/4" - 1 7/8"
Recommended Stall Converter: 3000-3800
Recommended Rear Axle Ratio: 3.42-4.30
Here is how Low Boost Films describes this camshaft: “If you’re a track enthusiast you’ve probably realized you want torque coming out of turns down low and not horsepower all the way at the top of the rev range. Well this is the cam for you. This cam was built specifically for Ken’s C5 Corvette on Low Boost Films. It makes gobs of torque between 3500-5000rpm but still can rev out to 6500rpm, perfect for any Track car, drift car, or a street car looking for tire shredding torque. “
The Track Weapon cam was designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability. Cam Motion offers this cam in 5150, 8660 and our top of the line 8620 camshaft cores. You can read more about our cam cores here > Cam Motion's cam cores
•Cam Motion .670" lift Dual Valve Spring Kit
•Cam Motion 5/16" .080" Wall Hardened Chromoly Pushrods