Cam Motion LS3 Stage 3 Camshaft (220/230-117+4)

Standard Version: Grind # XA220/325-XA230/325-17+4 Duration at .050 - 220/230 Lift with 1.7 - .553/.553 Lobe separation 117 Intake center line 113 High Lift Version: Grind # XA220/350-XA230/350-17+4 Duration at .050 - 220/230 Lift with 1.7 - .595/.595 Lobe separation 117 Intake center line 113 The LS3 Stage 3 camshaft was designed for enthusiast who want to increase power while maintaining excellent drivability and manners. This cams can be used with stock torque converters, stock rear gears, stock intake manifold, stock exhaust manifolds etc. However, additional performance gains can be realized when used with other performance modifications. The Stage 3 LS3 camshaft is the largest camshaft that we recommend with the stock torque converter. This Cam Motion hydraulic roller cam delivers mild performance idle, excellent low end torque, and extended RPM capabilities over the stock camshaft. This cam will work well as a performance replacement for Camaro, Firebird, Corvette, and other passenger cars needing more power without poor gas mileage associated with the larger cams. Cam Motion designed this camshaft in a "drop-in" version and a high-lift version. The drop-in cams are designed to be compatible with the Chevrolet Performance beehive valve springs or performance aftermarket .600" or .625" lift beehive springs. The high-lift version can be used with our .625" lift beehive springs or our .660" lift dual valve springs kits. This camshaft can be used with stock, existing lifters, but used lifters should be inspected for wear, damage or irregularities that could damage your new camshaft. Like all of our camshafts, our Mild Performance Camshafts utilize our renowned smooth, quiet and powerful cam lobes that are known throughout the LS community for quiet valve-train operation and superior valve-train stability.