Cam Motion Titan 2 Gen 5 LT 6.2 Camshaft VVT Delete (3-Bolt) (222/234-114+4)

Grind Number: XA222/340-XA234/335-14+4 Hydraulic Roller Camshaft Designed for performance use Duration at .050": 222/234 114 Lobe Center Angle with a 110 Intake Centerline Lift with 1.8 Rocker Arm Ratio: .612"/.603" Recommended Displacement: 6.2 Liter Engines Cylinder Heads: Gen 5 LT Recommended Compression Ratio: 10.0-11.5:1 Recommended Headers: 1 3/4" - 1 7/8" Recommended Stall Converter: 2400-3200 Recommended Rear Axle Ratio: 2.85-4.10 NOTE: Cam Motion Gen 5 LT VVT Delete Camshafts are 3-bolt camshafts that utilize a Gen 4 LS 3-bolt upper timing gear along with either the LME VVT Delete front timing cover or the Katech VVT Delete front timing cover. NOTE: The Cam Motion 3 bolt LT camshaft has a .306" lift fuel pump lobe. It is the installers responsibility to make sure that the fuel pump is operating within its stroke range. Lash caps or pump shims may be necessary to achieve proper operation and avoid pump damage. The TITAN II Gen 5 LT camshaft is designed for aggressive performance in cars using 6.2 liter LT engines. The TITAN II Gen 5 LT cam will have a mild performance idle and strong mid-range power. This camshaft will perform best in vehicles equipped with headers, high flow exhaust and increased stall speed torque converter and high flow intake systems. If you are looking for a great performance cam that you can daily drive, this camshaft is a great choice. The TITAN series cams are designed with our renowned smooth cam lobe design that provides quiet valve train operation and excellent upper rpm stability. Cam Motion offers this cam in 5150 steel alloy camshaft cores.