TSP Stage 3 High Lift 5.3 Truck Camshaft 110 LSA #25-TSP216220R6110

TSP Stage 3 High Lift Truck Cam Specs: 216/220 .600/.600 110 LSA This cam gained 67.1 HP and 26.8 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine! This cam uses proprietary TSP lobe profiles that are designed to work with any single or dual valve spring kit that is rated to support at least .600" valve lift. These lobes were designed with maximum valvetrain stability and longevity in mind while keeping the valvetrain as quiet as possible. 1400-6500 RPM Power Band; This is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! Engines best suited for: 4.8, 5.3, 5.7, 6.0 Desired Compression ratio for cam: 9.5;1+ Recommended Springs Required: PAC 1219 or TSP/PAC .660 Dual Valve Springs Aftermarket Stall Converter Required: No, but a 3000+ stall converter will give maximum performance Upgraded Rear Gear Required: No Operating RPM Range: 1200-6500 Power Increase: Gains of 67 Horsepower and 27 Ft. Pounds of Torque! Drivability: Great drivability and can be daily driven with no issues!